The Clutch 2 features the first ever two-shot moulding process, giving a two-colour factory dyed head for the first time.
With the two-shot moulding process the plastic is injected into the mould for the head and a full head is formed, although thinner at the scoop and the sidewall. The head is then placed into another mould where certain gates allow a second injection of plastic colourant to spread only to specific parts of the head. In this case it’s the scoop and sidewall. The plastic wraps around the original layer and levels out to a regular head.
This gives a whole new dimension to the factory dye job, allowing for heads to be two different colours straight from the factory.
Brine has also re-worked the design. The sidewall design remains the same, but the face shape, scoop, and throat are all new. Brine has introduced reverse flare to the head, which means the back sidewall of the head is narrower than the front, helping channel the ball into the sweet spot of the pocked better. Brine has also adjusted the angle of the scoop for an easier ground ball pick-up and created a throat that was designed to make that section of the head stronger while reducing small amounts of weight compared to the original Clutch.
The Clutch 2 is available in White, as well as White/ Black, White/ Carolina, White/ Forest, White/ Navy, White/ Neon Green, White/ Orange, White/ Red, White/ Royal, White/ Yellow.
http://www.uklacrosse.com/brine-clutch-2-i2227.html
| 
